Park Tool - 1170-2 - CRP-1 Crown Race Puller Replacement Blades
PARK TOOL - 1170-2 - CRP-1 CROWN RACE PULLER REPLACEMENT BLADES
The blades of the CRP-1 may be replaced as needed (part #1170-2, two required).
- Remove the four outer shell bolts and separate the outer shell and the inner shell.
- Loosen the two inner shell bolts if necessary and remove old blades.
- Install new blades, with the flat side of the blades facing outward.
- Secure the two inner shell bolts enough to allow blades to slide easily.
- Place outer shell over inner shell and re-install and tighten the four outer shell bolts